Gary Davis' Blog

DotNET/PayPal Development and other Techie Stuff
posts - 45, comments - 129, trackbacks - 0

How I Got My NookColor CM 10.2 to Mount SDCard Partition 4

Years ago, I rooted my NookColor to replace its eReader functionality with a standard Android tablet operating system. I used CyanogenMod version 7 and periodically upgraded to new versions.

Initially, I left the stock B&N eBook code (ROM) alone in the device and put all the modifications, upgrades, hacks, etc. on an SDCard left in place in the slot. Eventually, around CM 10.1, I decided to replace the B&N ROM with the CM 10.1 since I never booted into the stock ROM anymore. I did leave the SDCard in place and using the TWRP (TeamWin Recovery Project), I could select at boot time which ROM to boot into.

The SDCard is formatted with four partitions when set up to install or update CM7 ROMs. The first partition (partition #1 since numbering starts at 1 instead of 0), has the boot files and is a small partition. Partition #4 has the remainder of the data of the SDCard for pictures, videos, music, apps or whatever.

When booting to the device (emmc) ROM instead of to the SDCard ROM, the system mounts the 1st partition of the SDCard for data (called sdcard1). Since I have my data on partition #4, after installing a ROM upgrade, I would modify the boot to instead mount partition $1 as data. The way I did this was to modify file /system/etc/vold.fstab and change auto to 4 for the sdcard entry. Auto winds up mounting partition #1.

dev_mount sdcard /mnt/sdcard auto /devices/platform/mmci-omap-hs.0/mmc_host/mmc1

Well, when I upgraded to CM 10.2, which is Android Jellybean version 4.3, I could not find the file to edit. Some Binging around showed that vold.fstab was no longer used in 4.3. Instead, there was a file /init.encore.rc which was used at boot time to do various things including the filesystem mounts. This file mount_all to mount all requests in /fstab.encore. Looking at this file shows the statement:

/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc1 /storage/sdcard1
auto defaults voldmanaged=sdcard:auto

This is the line that has to change. Note there are two autos in that statement; the first is the filesystem type (for NookColor, it is basically VFAT) and the second is the partition number which is the one to change.

I switched to SuperUser mode and edited the file to change auto to 4 and rebooted. It did not work. The edited file was back to what it was originally.

A bit more Binging showed that the files are replaced at boot time with versions in the boot uRamdisk file. So I had to extract the fstab.encore file from the uRamdisk file, edit it and then replace the modified file back into the uRamdisk.

There are several steps to do this and there are various ways to do this. This is what I did.

The uRamdisk file is in boot partition #1 (on the device, not the SDCard). Once booted, this partition is not accessible so the first step was to mount partition #1 Using the terminal emulator in SuperUser mode:

cd /emmc

mkdir boot

mount –t vfat /dev/block/mmcblk0p1 boot

This switches to the /emmc folder which is the internal sdcard0 and is writable. Create an empty folder to be used as a mount point named boot. Finally mount the boot partition (device 0, partition #1) at /emmc/boot. Note, /emmc is the same as /storage/sdcard0. Also, /sdcard is the same as /storage/sdcard1.

Next, plug in your Nook to your Windows PC and enable the USB file sharing. Use explorer to locate the /emmc/boot/uRamdisk file to verify it is where you expect it. The emmc folder will be assigned a drive letter. If an external SDCard is in the Nook, it also will get a drive letter. Copy the uRamdisk file to your PC as a backup.

To extract the fstab.encore file, use BootUtil as discussed here. Download the BootUtil to a folder. Start a command prompt and change to that folder. Extract the fstab.encore file from the Nook version of the uRamdisk file (or use a local version if you prefer), edit it with notepad and replace the file back into the uRamdisk.

bookutil /l x:\emmc\boot\uRamdisk [optional list contents]

bookutil /v /x x:\emmc\boot\uRamdisk fstab.encore

[edit fstab.encore to replace the second auto with 4]

bookutil /v /r x:\emmc\boot\uRamdisk fstab.encore

Stop the USB file sharing, disconnect the cable, dismount the mounted boot

umount boot

Reboot and you should now have your SDCard partition #4 mounted

There are other ways of doing parts of this procedure such as using ADB or Samba, wifi instead of USB, dd instead of BootUtil, etc. If you have ideas on doing this without using the terminal console or all on the Nook instead of a Windows PC, please add some comments.

Print | posted on Sunday, September 15, 2013 2:54 PM |

Feedback

Gravatar

# re: How I Got My NookColor CM 10.2 to Mount SDCard Partition 4

I'd extract ramdisk.img from the ROM zip file... then:
bootutil /v /x ramdisk.img fstab.encore
use a unix compatible editor to change the sdcard1 line (could also use a dos based sed):
sed -i s/sdcard:auto/sdcard:4/ fstab.encore
bootutil /v /r ramdisk.img fstab.encore
9/15/2013 10:17 PM | DizzyDen

Post Comment

Title  
Name  
Email
Url
Comment   
Please add 2 and 6 and type the answer here:

Powered by:
Powered By Subtext Powered By ASP.NET